visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 0 9 2 2 j 5050d2 hf rev a ultra low profile 0805 power divider 50 to 50 description the PD0922J5050D2HF is a low profile, subminiatur e wilkinson power divider in an easy to use surface mount package and is ideal f or high volume manufacturing while delivering higher performances than tradition al printed and lumped element solutions. it has been designed for the following m arkets: dvbs, gsm, dcs, pcs, cdma and gps. the PD0922J5050D2HF is matched to 50 and has a height profile of 0.8 mm which is ideal for high level integrations. a 2 se ction wilkinson design results in increased isolation performance. two external resis tors are required for operation. components are available on tape and reel for high volume manufacturing pick and place. detailed electrical specifications: specifications subject to change without notice. room (25 c) parameter min. typ. max unit frequency 950 2150 mhz input port impedance 50 output port impedance 50 return loss 9.3 11 db insertion loss* 0.7 0.8 db amplitude balance 0.1 0.5 db phase balance 1 3 degrees isolation (output ports) 10.5 12 db power handling 2 watts features: ? 950 C 2150 mhz ? 12db isolation (output ports) ? good return loss ? 0.8mm height profile ? 50 outputs/inputs ? external resistors required ? low insertion loss ? surface mountable ? tape & reel ? nonconductive surface ? rohs compliant ? halogen free operating temperature 55 +85 oc * insertion loss stated at room temperature (insert ion loss is approximately 0.1 db higher at +85 oc) outline drawing designation output 1 input mid 2 mid 1 gnd output 2 5 4 2 16 3 pin mechanical outline dimensions are in millimeters 6x 0.22 4x 0.65 6x 0.98 orientation marker denotes pin location 4 orientation marker denotes pin location top view (near side) side view bottom view (far side) 2x 0.15 4x 0.37 2.040.10 1.290.10 0.850.08 1 2 3 6 5 6x 0.30
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 0 9 2 2 j5050d2 hf rev a typical broadband performance: 500 mhz. to 8.0 ghz. return loss input 36 33 30 27 24 21 18 15 12 9 6 3 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] [db] insertion loss 3.6 3.3 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0.0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] [db] amplitude balance 2 1.5 1 0.5 0 0.5 1 1.5 2 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] [db] phase balance 20 15 10 5 0 5 10 15 20 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] deg isolation 36 33 30 27 24 21 18 15 12 9 6 3 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] [db]
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 0 9 2 2 j 5050d2 hf rev a typical performance: 600 mhz. to 2600 mhz. return loss input 36 33 30 27 24 21 18 15 12 9 6 3 0 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 frequency [mhz] [db] insertion loss 3.6 3.3 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0.0 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 frequency [mhz] [db] amplitude balance 2 1.5 1 0.5 0 0.5 1 1.5 2 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 frequency [mhz] [db] phase balance 20 15 10 5 0 5 10 15 20 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 frequency [mhz] deg isolation 36 33 30 27 24 21 18 15 12 9 6 3 0 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 frequency [mhz] [db]
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 0 9 2 2 j5050d2 hf rev a mounting configuration: in order for xinger surface mount components to wor k optimally, the proper impedance transmission line s must be used to connect to the rf ports. if this condition is not satisfied, insertion loss, isolation and vs wr may not meet published specifications. all of the xinger components are constructed from o rganic ptfe based composites which possess excellen t electrical and mechanical stability. xinger compone nts are compliant to a variety of rohs and green st andards and ready for pbfree soldering processes. pads are gol d plated with a nickel barrier. an example of the pcb footprint used in the testing of these parts is shown below. in specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. in addition, s ince the PD0922J5050D2HF is a wilkinson power divid er, external 0402 100 and 200 resistors must be mounted in location s r1 and r2 respectively, as shown in the figure below. pad footprint w/ wilkinson 0402 resistor locations r2 r1 circuit pattern footprint pad (s) solder resist mounting footprint dimensions are in millimeters 6x .41 6x .33 .04 4x .25 .66 plated thru holes to ground 3x transmission lines
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 0 9 2 2 j 5050d2 hf rev a packaging and ordering information parts are available in reel and are packaged per ei a 4812. parts are oriented in tape and reel as sh own below. minimum order quantities are 4000 per reel. see model numbers be low for further ordering information . .25 2.41 1.00 8.00 4.00 2.00 1.75 3.50 4.00 1.60
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: anaren: ? PD0922J5050D2HF
|
